CaseIH 4230 Specifications
Engine Horsepower: 84 hp
Manufactured: 1994 to 1997
CaseIH 4230 Summary
The CaseIH 4230 was produced from 1994 to 1997 as part of the 4200 Utility Series. This utility tractor was manufactured by CaseIH in Doncaster, England. It features a 4.4L 4-cylinder diesel engine with 84 hp gross, 79 hp net, and a PTO (claimed) of 72 hp. Variants include chassis options of 4x2 2WD or 4x4 MFWD 4WD, with mechanical differential lock on ROPS and electro-hydraulic on the cab. The tractor offers multiple transmission options, including 8-speed and 16-speed variants.
CaseIH 4230 Horsepower, Weight, and Specifications:
Production
Who manufactured the CaseIH 4230 and where?
- Manufacturer: CaseIH
- Type: Utility tractor
- Factory: Doncaster, England
- Original price: $30,000 (1997)
Horsepower
What is the horsepower of the CaseIH 4230?
- Engine (gross): 84 hp / 62.6 kW
- Engine (net): 79 hp / 58.9 kW
- PTO (claimed): 72 hp / 53.7 kW
Engine
What type of engine does the CaseIH 4230 have?
- Engine: Case 4.4L 4-cyl diesel
Mechanical
What are the mechanical features of the CaseIH 4230?
- Chassis: 4x2 2WD / 4x4 MFWD 4WD
- Differential lock: mechanical (ROPS) / electro-hydraulic (cab)
- Steering: hydrostatic power
- Brakes: hydraulic wet disc
- Cab: Two-post ROPS. Cab optional with air-conditioning.
- Transmissions: 8-speed synchromesh / 8-speed shuttle / 16-speed partial power shift / 16-speed synchromesh creeper
Capacity
What are the fuel and hydraulic capacities of the CaseIH 4230?
- Fuel: 20 gal / 75.7 L (ROPS), 29.6 gal / 112.0 L (cab)
- Hydraulic system: 9 gal / 34.1 L (2WD), 9.7 gal / 36.7 L (cab)
Hydraulics
What are the hydraulics specifications of the CaseIH 4230?
- Type: open center
- Capacity: 9 gal / 34.1 L (2WD), 9.7 gal / 36.7 L (cab)
- Pressure: 2500 psi / 172.4 bar
- Valves: 0 to 3
- Total flow: 16.1 gpm / 60.9 lpm, 18.4 gpm / 69.6 lpm (optional)
Tractor Hitch
What is the hitch capacity of the CaseIH 4230?
- Rear Type: II
- Control: draft and position control
- Rear lift: 3,665 lbs / 1662 kg
Power Take-off (PTO)
What are the PTO specifications of the CaseIH 4230?
- Rear PTO: independent
- Clutch: hydraulic wet disc
- Rear RPM: 540, 540/1000 (optional)
Dimensions & Tires
What are the dimensions and tire sizes of the CaseIH 4230?
- Wheelbase: 88.7 inches / 225 cm (2WD), 88 inches / 223 cm (4WD)
- Weight: 6687 to 7395 pounds
- Front tire: 7.50-16
- Rear tire: 16.9-28 (2WD)
Electrical
What are the electrical specifications of the CaseIH 4230?
- Ground: negative
- Charging system: alternator
- Charging amps: 45, 65 (cab, ROPS opt.)
- Battery CCA: 650, 810 (optional)
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
