International Harvester 1056 Specifications
Engine Horsepower: 105 hp
Manufactured: 1982 to 1985
International Harvester 1056 Summary
The International Harvester 1056 was produced from 1982 to 1985 and is part of the 56XL Series of row-crop tractors. It features a 5.9L 6-cylinder diesel engine with a net horsepower of 105 hp and a claimed PTO horsepower of 92 hp. The tractor was built in Neuss, Germany. Variants include the 1056XL with a deluxe cab.
International Harvester 1056 Horsepower, Weight, and Specifications:
Production
Who manufactured the International Harvester 1056 and where was it built?
- Manufacturer: International Harvester
- Type: Row-Crop Tractor
- Built in: Neuss, Germany
Variants
What are the variants of the International Harvester 1056?
- 1056XL: Deluxe cab variant
Engine
What are the engine specifications of the International Harvester 1056?
- Type: International Harvester 5.9L 6-cyl diesel
Transmission
What transmission options are available for the International Harvester 1056?
- Speeds: 8-speed, 16-speed two-speed power shift
Horsepower
What is the horsepower of the International Harvester 1056?
- Engine (net): 105 hp (78.3 kW)
- PTO (claimed): 92 hp (68.6 kW)
Mechanical
What are the mechanical features of the International Harvester 1056?
- Drive: Two- or four-wheel drive
- Final drives: Planetary
- Differential lock: Mechanical rear
- Steering: Power steering
- Roll-Over Protection (ROPS): Four-post ROPS, standard cab, and deluxe XL cab optional
Capacity
What is the fuel and hydraulic capacity of the International Harvester 1056?
- Fuel: 37 gal (140.0 L)
- Hydraulic system: 12.2 gal (46.2 L)
Hydraulics
What are the hydraulic system details of the International Harvester 1056?
- Type: Open center
- Capacity: 12.2 gal (46.2 L)
- Pressure: 2346 psi (161.8 bar)
- Pump flow: 11.1 gpm (42.0 lpm)
Tractor Hitch
What type of hitch and lifting capacity does the International Harvester 1056 have?
- Rear Type: II
- Control: Position and draft control
- Rear lift (at ends): 9171 lbs (4159 kg), optional 11023 lbs (5000 kg)
Power Take-off (PTO)
What are the Power Take-off (PTO) specifications of the International Harvester 1056?
- Rear PTO: Independent
- Clutch: 310mm dry disc
- Rear RPM: 540/1000
- Engine RPM: 540@1920, 1000@2000
Dimensions & Tires
What are the dimensions and tire specifications of the International Harvester 1056?
- 2WD Wheelbase: 103.4 inches (262 cm)
- 4WD Wheelbase: 101.9 inches (258 cm)
- Weight: 9017 to 10626 pounds
- Front tire: 7.50-18
- 2WD Rear tire: 18.4R34
Electrical
What are the electrical specifications of the International Harvester 1056?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 55
- Battery volts: 12
- Battery AH: 143
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
