International Harvester 484 Specifications
Engine Horsepower: 50 hp
Manufactured: 1977 to 1982
International Harvester 484 Summary
The International Harvester 484 is a utility tractor produced from 1977 to 1982, part of the 84 Series. It features a 2.9L 3-cylinder diesel engine with an engine power of 50 hp. Claimed drawbar and PTO power are 38 hp and 42.4 hp, respectively, with tested values of 36 hp drawbar and 42.42 hp PTO. It was manufactured by International Harvester in Doncaster, England.
International Harvester 484 Horsepower, Weight, and Specifications:
Production
Who manufactured the International Harvester 484 and where?
- Manufacturer: International Harvester
- Type: Utility tractor
- Location: Doncaster, England
- Original Price (1984): $11,800
Engine
What type of engine does the International Harvester 484 have?
- Engine: International Harvester 2.9L 3-cylinder diesel
Transmission
What type of transmission is in the International Harvester 484?
- Transmission: 8-speed syncromesh
Horsepower
What is the horsepower of the International Harvester 484?
- Engine: 50 hp (37.3 kW)
- Drawbar (claimed): 38 hp (28.3 kW)
- PTO (claimed): 42.4 hp (31.6 kW)
- Drawbar (tested): 36 hp (26.8 kW)
- PTO (tested): 42.42 hp (31.6 kW)
Mechanical
What are the mechanical features of the International Harvester 484?
- Drive: Two-wheel drive
- Steering: Power steering
- Brakes: Independent hydraulic wet disc brakes
- ROPS: Two-post fixed, canopy optional
Capacity
What are the fuel and hydraulic capacities of the International Harvester 484?
- Fuel: 20 gal (75.7 L)
- Hydraulic system: 9 gal (34.1 L)
Hydraulics
What are the hydraulic specifications of the International Harvester 484?
- Type: open center
- Capacity: 9 gal (34.1 L)
- Valves: 0 to 2
- Total flow: 15.4 gpm (58.3 lpm)
Tractor Hitch
What are the hitch specifications of the International Harvester 484?
- Rear Type: II
- Control: position and draft control
- Rear lift: 3100 lbs (1406 kg)
Power Take-off (PTO)
What are the PTO features of the International Harvester 484?
- Rear PTO: independent
- Clutch: hydraulic wet disc
- Rear PTO Type: 540
Dimensions & Tires
What are the dimensions and tire specifications of the International Harvester 484?
- Utility Wheelbase: 79 inches (200 cm)
- Low-profile Wheelbase: 78.25 inches (198 cm)
- Weight: 5140 to 5200 pounds
- Front tire: 6.00-16
- Rear tire: 13.6-28
Electrical
What are the electrical specifications of the International Harvester 484?
- Ground: negative
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
