John Deere 4055 Specifications
Engine Horsepower: 126 hp
Manufactured: 1988 to 1992
John Deere 4055 Summary
The John Deere 4055, produced from 1988 to 1992, is a row-crop tractor from the 4055 series. It is manufactured by John Deere in Waterloo, Iowa, USA. The tractor boasts an engine power of 126.1 hp, claimed PTO power of 106 hp, tested drawbar power of 100.07 hp, and tested PTO power of 114.11 hp. The John Deere 4055 is available in 2WD and 4WD variants.
John Deere 4055 Horsepower, Weight, and Specifications:
Production
Where was the John Deere 4055 manufactured?
- Manufacturer: John Deere
- Type: Row-Crop tractor
- Factory: Waterloo, Iowa, USA
Horsepower
What is the horsepower of the John Deere 4055?
- Engine (net): 126.1 hp (94.0 kW)
- PTO (claimed): 106 hp (79.0 kW)
- Drawbar (tested): 100.07 hp (74.6 kW)
- PTO (tested): 114.11 hp (85.1 kW)
Engine
What type of engine does the John Deere 4055 have?
- Engine: John Deere 7.6L 6-cyl diesel
Mechanical
What are the mechanical specifications of the John Deere 4055?
- Chassis: 4x2 2WD / 4x4 MFWD 4WD
- Final drives: inboard planetary
- Steering: power
- Brakes: differential hydraulic wet disc
- Cab: Sound-Gard cab
- Transmissions:
- 16-speed partial power shift
- 15-speed full power shift
Capacity
What is the fuel and hydraulic fluid capacity of the John Deere 4055?
- Fuel: 65 gal (246.0 L)
- Hydraulic system:
- 13.5 gal (51.1 L) (Powershift 2WD)
- 15.9 gal (60.2 L) (Powershift 4WD)
- 16 gal (60.6 L) (Quad-Range 2WD)
- 17.2 gal (65.1 L) (Quad-Range 4WD)
Hydraulics
What are the hydraulic capabilities of the John Deere 4055?
- Type: closed center
- Capacity:
- 13.5 gal (51.1 L) (Powershift 2WD)
- 15.9 gal (60.2 L) (Powershift 4WD)
- 16 gal (60.6 L) (Quad-Range 2WD)
- 17.2 gal (65.1 L) (Quad-Range 4WD)
- Pressure: 2530 psi (174.4 bar)
- Valves: 2 or 3
- Pump flow: 26.5 gpm (100.3 lpm)
- SCV flow: 20.6 gpm (78.0 lpm)
Tractor hitch
What is the lifting capacity of the John Deere 4055's rear hitch?
- Rear Type: II
- Rear lift:
- 5504 lbs (2496 kg) (Advertised as 6550 pounds, the tractor was only able to lift 5504 during testing.)
- 7281 lbs (3302 kg) (With optional assist cylinder. Advertised as 8470 pounds, but actual tested lift was 7271 pounds.)
Power Take-off (PTO)
What are the PTO specifications of the John Deere 4055?
- Rear PTO: independent
- Clutch: hydraulic
- Rear RPM: 540/1000 (1.375)
Dimensions & Tires
What are the dimensions and types of tires used on the John Deere 4055?
- 2WD Wheelbase: 106.7 inches (271 cm)
- 4WD Wheelbase: 105.3 inches (267 cm)
- Weight: 12130 to 13955 pounds
- Front tire: 10.00-16
- 2WD Rear tire: 18.4-38
Electrical
What are the electrical specifications of the John Deere 4055?
- Ground: negative
- Charging system: alternator
- Charging amps: 120
- Batteries: 2
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.