John Deere 6430 Specifications
Engine Horsepower: 115 hp
Manufactured: 2007 to 2012
John Deere 6430 Summary
The John Deere 6430 tractor was produced from 2007 to 2012 and is part of the 6030 Series. It was manufactured at the John Deere factory in Mannheim, Baden-W\u00fcrttemberg, Germany. Variants include the 6430 Premium, which features a premium cab and upgraded options. The engine provides a gross horsepower of 120 hp (89.5 kW) and the PTO claims 90 hp (67.1 kW), which increased to 99 hp (73.8 kW) after 2009. The drawbar tested horsepower is 88.45 hp (66.0 kW) and the PTO tested horsepower is 111.06 hp (82.8 kW).
John Deere 6430 Horsepower, Weight, and Specifications:
Production
Where was the John Deere 6430 manufactured and who made it?
- Manufacturer: John Deere
- Factory: Mannheim, Baden-W\u00fcrttemberg, Germany
Variants
Are there any variants of the John Deere 6430?
- 6430 Premium: Premium cab and upgraded features
Horsepower
What is the horsepower of the John Deere 6430?
- Engine (gross): 120 hp / 89.5 kW
- PTO (claimed): 90 hp / 67.1 kW; 99 hp / 73.8 kW (after 2009)
- Drawbar (tested): 88.45 hp / 66.0 kW
- PTO (tested): 111.06 hp / 82.8 kW
Engine
What type of engine does the John Deere 6430 have?
- Type: John Deere 4.5L 4-cyl diesel
Mechanical
What are the mechanical specifications of the John Deere 6430?
- Chassis: 4x2 2WD, 4x4 MFWD 4WD optional
- Steering: Hydrostatic power
- Brakes: Hydraulic wet disc
- Cab: Two-post ROPS, Cab optional
- Transmissions: 12-speed fully synchronized, 16-speed synchronized with power shuttle, 16-speed partial power shift, 24-speed partial power shift
Capacity
What is the fuel and hydraulic capacity of the John Deere 6430?
- Fuel: 43.6 gal / 165.0 L, 48 gal / 181.7 L (optional)
- Hydraulic system: 13.7 gal / 51.9 L
Hydraulics
What are the hydraulic specifications of the John Deere 6430?
- Type: Open-center load sensing, Closed-center pressure-flow compensated (optional)
- Capacity: 13.7 gal / 51.9 L
- Pressure: 2900 psi / 200.0 bar
- Valves: 1 to 3
- Total flow: 21.1 gpm / 79.9 lpm, 29 gpm / 109.8 lpm (optional)
Tractor Hitch
What are the hitch specifications for the John Deere 6430?
- Rear Type: II/III
- Rear lift (at 24\"/610mm): 4,450 lbs / 2018 kg
Power Take-off (PTO)
What are the PTO specifications of the John Deere 6430?
- Rear PTO: Independent
- Rear RPM: 540, 540/1000
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 6430?
- Wheelbase: 94.5 inches / 240 cm
- Weight: 10,000 lbs / 4536 kg
Electrical
What are the electrical specifications of the John Deere 6430?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 115
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
