Towed Hay Rake Manual - SCH EHR

Introduction to SCH EHR Hay Rake

The SCH EHR Hay Rake is designed for efficient hay collection in wildflower meadows and is an excellent companion for those using drum or sickle mowers. With its successor topping the HR19 model, the EHR offers enhanced features and ease of use. This guide breaks down the specifications, operation details, and safety measures to ensure you get the most out of your towed hay rake.

Key Specifications of SCH EHR Hay Rake

• Dimensions: The EHR boasts an overall width of 2000mm (79”) and a working width of 1400mm (55”), making it ideal for large-scale operations.
• Wheels: Equipped with 400 x 8 pneumatic wheels, it ensures smooth movement across various terrains.
• Towing Mechanism: A rise & fall clevis hitch comes as standard with an optional 50mm ball hitch available, providing versatility in towing.

Essential Safety Instructions for SCH EHR Hay Rake

• Placement: Always store the hay rake in a place where it does not pose a tripping hazard.
• Attachment: Ensure the rake is securely attached to the towing vehicle to prevent accidents.
• Secure Parts: Before operating, check that the rise & fall hitch and jack leg locking bolts are tight and secure.
• Surrounding Awareness: Operate the rake away from people to prevent injuries.

Adjusting the Rise & Fall Hitch

Adjusting the hitch ensures that the rake operates efficiently and is best done with assistance. Here’s how to do it:

• Connect the rake to the towing vehicle and loosen the bolts on the rise & fall hitch for height adjustment.
• Align the top of the hay rake to be level with the ground.
• Once adjusted, tighten the bolts to secure the hitch in place.

Setting the Rake Tines

For optimal raking efficiency, the tines should lightly touch the ground. Achieve this by:

• Loosen the ‘T’ bolt to adjust the jack legs.
• Use the screw jack handle to fine-tune the height of each side until the tines lightly graze the ground surface.
• Secure the adjustment by tightening the ‘T’ bolts.

Operation Guide for SCH EHR Hay Rake

The hay rake features a pull cord system for raising and lowering the tines, which is essential for the collection and release of hay. To use the rake:

• To begin work, detach the rope from the tow bar cleat, dropping the tines into the working position.
• Start moving forward at a slow pace to gather hay.
• To release collected hay, halt the vehicle, reverse slightly to alleviate pressure on the tines, then pull the rope handle to lift the tines and discharge the hay efficiently.
• Clear the dropped hay before lowering the tines and proceeding with your work.

Conclusion

The SCH EHR Hay Rake serves as a dependable tool for effectively collecting hay. Following the specific setup, operational techniques, and adhering to the safety measures outlined will ensure that you maximize your hay collection efforts while maintaining a safe working environment. Remember, proper adjustment and operation are key to leveraging the full capabilities of the EHR Hay Rake.

Important:

Please refer to the manufacturer's official manual before using this product or carrying out repairs.