Chapman MF350 UTV Mounted Stock Feeder

Reference: MF350

Chapman MF350

Add to Basket
Description

SIMPLE & RELIABLE
The MF350 Mounted Stock Feeder (Sheep Snacker) is an electric drive spaced-drop feeder designed for fitment into a UTV or 4×4 pickup bed. Featuring fully galvanised all-steel construction & electronic operation with high-visibility digital counter ensure the right amount of feed is dispensed, exactly where you want it.

Specifically designed to fit all popular UTV’s, for a simple, robust drop feeder you can rely on.

• 300kg capacity spaced drop sheep/cattle feeder
• Electric operation and digital counter
• Fully galvanised, robust construction
• Unique countdown function
• Offset drop to avoid tow bar
• Fits all popular UTVs

SAVE TIME AND HASSLE
Don’t mess around with bagged feed and troughs, the MF350 Livestock Feeder / Sheep Snacker allows you to drop the right amount of feed in the right place each time.

Drop size is variable from 0.5kg to 2kg (approx), and drop spacing is controlled by the forward speed of the UTV or 4×4. Based on the same running gear as the TF350 Trailed feeder, the drive system and electronics are tried and tested. Furthermore, the control module is interchangeable between mounted and trailed models!

PRECISE DIGITAL COUNTER
The digital counter ensure you know exactly how much has been deposited, and allows you to focus on checking stock condition.

Operable as either a count-up timer, from o drops upwards, or as a countdown counter, whereby the desired number of drops is set, and the machine will deposit exactly that amount of feed, simply and reliably each and every time. Simple design, quality construction, and galvanised finish for a long lasting, reliable machine.

ELECTRONIC DRIVE
The electronic drive system on the MF350 & TF350 stock feeder has few moving parts and only rotates when in operation, reducing wear and tear, and allowing towing over longer distances. All electronic components are IP67 rated, for use in the toughest conditions.

Operation is simple even when wearing thick winter gloves, and the large, brightly backlit display is easy to read even in the worst conditions. The countdown function is ideal for reliably dropping exactly the right amount of feed and freeing the operator to focus solely on checking stock condition. The control unit when off consumes minimal power, so will not flatten batteries if hard-wired onto the towing vehicle.

EXCEPTIONALLY STRONG & LIGHTWEIGHT
The MF350 Mounted sheep snacker by Chapman Machinery is designed to be exceptionally strong, yet lightweight enough for use in wet, wintery conditions. The fully galvanised hopper is made from robust 2mm folded steel, for strength yet without being excessively heavy – the entire MF350 weighs around 90kg when empty, allowing you the full 300kg max feed capacity (depending on UTV load limits)!

The drop deflector allows use with a trailer, depositing the feed on the clean ground between the wheels of the towing vehicle and trailer (if used with a trailer).

Optional Extras:-

ADDITIONAL CONTROL BOX
Additional control box to allow the machine to be used on an additional towing vehicle without swapping the control electrics over – ideal if the feeder is used on multiple vehicles, eg. ATV and 4×4. Interchangeable with controls for towed TF350 version.

Specifications

Brand

Chapman Machinery

Weight

90kg (Unladen)

Capacity

300 Litre (approx. 250kg feed)

Drops per Minute

25

Drop Size

0.25-2kg (min / max may be limited by feed type)

Supply Voltage

13.8V Nominal [10v / 18v (min / max)]

Operating Temperature

-15/+50°C (min/max)

Incorrect Polarity Protection

Included

Overload Thermal Rest Time

30 Seconds

Country of Manufacture

Proudly made in Britain. - Placeholder Proudly made in Britain.

Made in Britain

Warranty

24 months manufacturer's warranty

About Chapman Machinery

All Chapman products are proudly Made in Britain.

Chapman Machinery design, manufacture & distribute high quality agricultural and equestrian products across the UK and Europe, offering fantastic value-for-money without compromising on product quality or specification.

The products offered by Chapman Machinery are designed and built in the UK to exacting standards, where experience backed by innovative design results in high quality machinery.

Related products Customers also bought