Winton WVF130 1.3m PTO Verge Flail Mower

Winton WVF130

Add to Basket

The Winton verge flail mower WVF130 is a heavy duty machine which is perfect for tackling overgrown areas. This mower can be hydraulic offset to the side and also angled for access to hard to reach areas. This requires 2 double acting spools on the tractor for the 4 hoses which then operate the left-right movement & the up-down tilt of the cutting head. This means the flail is ideal for cutting up to and around trees when used horizontally. When tilted up or down the flail will cut slopes on verges or ditches. Finally it can be set up to cut vertically for the sides of lower hedgerows. The WVF verge flail is specified with left hand offset for UK roadside or verges.

Fitted with heavier hammer flails and gearbox for tougher grass and weed control. This flail can then be used when grass and weeds are at a more manageable length to give a fine grass finish when used regularly. Several hammer style blades are mounted to the cylindrical rotor in a spiral layout. This action is most efficient and creates finer cuttings. It is also better suited to uneven ground types than conventional rotary and topper mowers. The mower is also belt driven, there are 3 drive belts which give power to the blade rotor shaft.

This machine benefits from an adjustable rear roller, this can then be adjusted up or down along with the tractor top link arm to change finish and cutting height. The rear roller helps to avoid blade scalping on uneven areas. The mower also benefits from 2 height adjustable skids to adjust the cutting height. It also helps to avoid the mower scalping and leave an even cut when mowing.

The implement can be attached to the 3 point linkage of a range of small or compact tractors.

• Hedge tilt suitable for use on UK roads
• Robust heavy duty gearbox
• Spirally arranged blades for an efficient cut
• Hydraulic offset A-frame
• Height adjustable skids
• 3-8cm cutting height range
• Adjustable rear roller
• Heavy hammer flail blades
• Category 1 size linkage

IMPORTANT: We include a PTO shaft FREE of charge with all Winton Machines that require one.



Winton Machinery




155 x 76 x 60 cm

Tractor HP Required (range)


Cutting Heights


Working Width


Number of Blades


Blade Type

Hammer Blade

Min. Hydraulic Fittings


Linkage Type

Category 1

Oil Type

Gear 80W90

PTO Shaft

Included FREE of charge


12 months manufacturer's warranty

Winton Heavy Duty Verge Flail Mowers

About Winton Machinery

Agricultural Products for Smallholders & Farmers

Winton Machinery specialises in tractor mounted and PTO driven mowers, suitable for small compact through to medium sized tractors. Their range of groundcare machinery takes the typical mower and enhances the durability and robustness by upgrading several key components such as bearings, gearboxes and blades.

Most Popular Best Selling